Create subassemblies for Civil 3D with the user-friendly interface of Subassembly Composer. The Autodesk Subassembly Composer has been. When it comes to corridor modeling, Civil 3D provides a large number of subassembly parts right out of the box. Since these parts are also. One of the most common Sub-Components I get asked about is the Subassembly Composer for Civil 3D and so I am writing this helpful guide.
|Published (Last):||3 March 2008|
|PDF File Size:||20.32 Mb|
|ePub File Size:||1.89 Mb|
|Price:||Free* [*Free Regsitration Required]|
Save the file and close Subassembly Composer. Add another Output Parameter. Conclusion Now you have two parametric subassemblies made from scratch.
This point will use a point code so a feature line can be created when connecting multiple sections suassembly this subassembly.
Customizing with Subassembly Composer | AUGI – Autodesk User Group International
Think about the subassemblies you use when building corridors. The direction is input because it is an input parameter, meaning that the user will input the value. The codes used when creating a subassembly will work with the codes in the Code Set Styles, point codes will create feature lines, and links can be used for surface creation. When we customize a program or a graphical user interface it usually is because we want to modify the way things look and behave. Slanted curb in Subassembly Composer At this point the subassembly is ready and it should look like Figure 3.
This will be the origin and insertion point. Constant Length and Varying Slope Subassembly This subassembly works similar to the LinkWidthAndSlope generic subassembly, but this one keeps the length constant regardless of the slope. Make sure the type is set to double, which is the type of parameter that will let you input values with decimal figures.
Name the new Palette Custom Subassemblies.
Those tools are great the way they are, but we can make them even composeer through customization and by using Autodesk Subassembly Composer. Now that you know how to use Subassembly Composer, go ahead and create coomposer own subassemblies, draw them in your mind, then on paper, and then build the subassembly. From the toolbox under the Geometry category, drag a Point component and drop it into the Flowchart window. Drag and drop another point component.
Miguel can be reached at mmedina prosoftnet. Flowchart is where you lay out the workflow: Packet Settings is where you create and set up the subassembly parameters, targets, and so on.
Use Subassembly Composer – Create a Civil 3D Subassembly – EnvisionCAD
The problem is that if you want to use different dimensions, you would have to create a new one. Add civl point component by dragging it from the toolbox and dropping it into the flowchart window. Set Output Parameter to Slope, which is one of the output parameters that was created in the packet settings.
At this point this value is unitless—the units will depend on the units you use in your drawing. For this subassembly we will use output parameters that can be viewed as variables used for calculations. We want to be able to use positive and negative grade values because depending on that, you will draw something different. AutoCAD has some verticals with specialized tools to design and draft elements pertaining to different industries. At this point the subassembly is closed, but it is empty.
Repeat the previous steps for the other parameters and make sure your parameters match what is shown in Figure 2. This subassembly works similar to the LinkWidthAndSlope generic subassembly, but this one keeps the length constant regardless of the slope. For Delta X type BottomWidth—in this case it is going to go to the right from P2 so the value would be positive.
This makes the way Subassembly Composer works seem a little weird, so when you design a subassembly it is always a good idea to start by drafting an outline by hand. Add another Output parameter from the toolbox. The process is similar in that you have to create parameters and use those parameters to define targets.
In Subassembly Composer you can also create subassemblies that work with targets. This point will be used as the origin and as a reference for positioning the next point. The location of this point will be measured in terms of deltas in the X and Y direction with respect to the origin point. Figure 1 shows the basic anatomy of a subassembly with codes, points, links, and shape.
The codes used when creating a subassembly will work with the codes in the Code Set Styles, point codes will create feature lines, and links can be used for surface creation Figure 1: Atan Slope ; this will give you the slope in radians.
For this point there is no need to modify anything else. PI; this will convert the Atan into degrees.
Use Subassembly Composer – Create a Civil 3D Subassembly
Customize It and Make It Yours When we customize a program or a graphical user interface it usually is because we want to modify the way things look and behave. As an AutoCAD user, you are accustomed to drawing lines in a very visual way.
Hover over one of the tabs in the tool palette, right-click and select New Palette. It will be directly below the origin at shbassembly distance of negative Depth, which is a parameter previously defined, and no displacement in the X direction.
Customizing with Subassembly Composer
Properties is where you set the properties for each of the elements you bring in from the toolbox; properties include geometry, calculations, and overall behavior.
Hand-drawn schematics Figure 6: You can solve this in Civil 3D if you create a closed polyline, turn it divil a subassembly, then assign codes, links, and shape and it probably would be fine.
Add this subassembly to the Custom Subassemblies palette the same way you did with the other subassembly.